This customer brought it an Aeroflow Dynamics body kit consisting of a rear diffuser, side skirts, and front spoiler lip for his Subaru WRX. The material was aluminum, which is considerably heavier than the usual plastic or fiberglass we're used to. In this regard it's much more solid and there fore will need more reinforcement to secure it safely. The fitment was quality and no extra holes needed to be drilled into the pieces. The aluminum pieces were pre-painted black.
Below is the result of the front spoiler. As you can see it fits flush with the spoiler. While this front spoiler is significantly heavier than other spoiler consisting of plastic the bottom bumper of this vehicle has a lot of plastic to support the weight of the front spoiler.
The Side Skirts
Below are two pictures of the side skirts. Unfortunately we took them while the vehicle was on the lift and is therefore bending them slightly.
Self tapping screws and washers were the only added hardware used for the front spoiler and side skirt pieces. The side skirts used about 10 for each side, while the front spoiler used about 8.
Lastly the diffuser...
This Aeroflow Dynamics diffuser actually comes in three pieces. The two side diffuser pieces are held on hex bolts and nuts. Unfortunately one of the hex bolts came with metal still inside the hex bolt area where the tool is inserted into so we had to substitute it with another.
